Update 5.071 BETA
De update bevat nieuwe functionaliteiten waaronder stroomverbruiksgrafieken in het tabblad geavanceerd apparaat, ondersteuning voor Walli Controller, Z-Smoke 230V, Z-Temp2, Z-TRM3, Sensative Strips Guard, Gateway Connection voor koppelen van twee of meer Home Centers 3.
Belangrijke informatie over Z-Wave Engine 3.0:
- Het is alleen mogelijk om de Z-Wave engine 3.0 te gebruiken na het resetten van de gateway. Gateway moet via recovery naar fabrieksinstellingen gezet worden;
- Producten die toegevoegd worden aan de nieuwe engine verliezen hun instellingen voor de 2.0 engine. Hierdoor is het apparaat niet meer bruikbaar met een back-up.
- Het is (nog) niet bekend hoe ieder Z-Wave product functioneert en weergegeven wordt in de nieuwe engine.
- FGT-001 is (nog) niet compatibel met de Z-Wave 3.0 engine.
- Apparaten met ondersteuning voor security mode worden standaard toegevoegd met S0 security, dit kan van invloed zijn op het Z-Wave verkeer en de batterij duur.
- Associaties en parameters worden veelal automatisch ingeladen. Het is nog niet mogelijk om zelf parameters toe te voegen als deze niet automatisch ingeladen wordt. Bij sommige apparaten kunnen associaties nog niet gewijzigd worden.
Changelog:
* – applies only to Home Center 3 Lite
** – not available for Home Center 3 Lite
What’s new:
Dashboard
Unified text size and colour on the right sidebar.
Status toasts after performing actions on devices using the right sidebar.
No limit to the number of devices. *
System notification after exceeding the recommended number of devices. *
Devices
Unified content of Advanced tab for devices of the same type.
Advanced tab for all types of linked devices.
Current/total energy consumption view switch.
Critical push notifications available only for life danger events.
Requiring confirmation before clearing the energy data.
Sum function available for linked devices of the multilevel sensor type.
Two possible configurations of the energy meter device.
Support for Heatit Z-Smoke Detector 230V version 4.2.
Support for Heatit Z-Temp2 version 1.2.
Network
Possibility of adding a second Wi-Fi network for emergency auto-switching.
Connecting to emergency network after losing connection to main network.
Storing the credentials of added Wi-Fi networks after its disconnecting.
Retrying to connect to main network each 30 minutes when connected to emergency network.
Possibility of testing the connection to emergency network.
Nice **
Backing up Nice devices in the system configuration backup.
Nice remotes available as scene triggers.
Improved view of adding new device.
Changes on the binding view.
Support for NiceHome devices.
Other
Tooltips on the interface menu icons.
Possibility of skipping the ongoing first system configuration process at any step.
Profiles
Door locks available to open/close in any profile.
Quick Apps
Option of hiding the button.
Rooms
Possibility of choosing the main room energy meter.
Scenes
Redirection to expanded scene view from scenes dashboard.
Bug fixes:
Access
Incorrect limit of characters when editing a user’s e-mail address.
No auto-logging when accessing the gateway via remote access.
Alarm
Cannot arm the whole house if there are unconfigured alarm zones.
Dashboard
Unable to manually set the temperature on Fibaro Heat Controller from the right sidebar.
Unable to override the temperature on third-party thermostats from the right sidebar.
Devices
Scenes added from device Advanced tab are not displayed in this tab.
Linked device of thermostat type is always equipped with all operating modes.
Notifications from devices come too often and not according to selected interval.
Possibility to set the ID of an icon that no longer exists.
Gateway Connection
No central scene events from devices added to slave gateways.
Scenes based on scene activation events from devices added to slave gateways do not work.
Cannot change icons of devices added to slave gateways.
Unable to force the removal of devices from slave gateways.
Unable to change wakeup interval of battery devices added to slave gateway.
Wrong message about restoring default password when removing disconnected slave gateway.
No possibility to set polling time and run mesh reconfiguration on slave gateways.
Error after removing a disconnected slave gateway.
Restored local backup does not include slave gateways.
Connect and Replace buttons available inadequately.
History
Users see events from devices to which they do not have permission.
Network
Unexpected Wi-Fi connection loss. *
Nice **
Scenes with Nice Mono and BiDi devices do not work.
Notifications
Duplicated notifications of available template after rebooting the gateway.
Unexpected Nice radio protocol connection timeout notification.
Other
Numerical values are rounded incorrectly.
Cannot close toast messages.
Performance
Significant delays in Z-Wave network communication.
Few minutes after rebooting system is not available.
In some cases, the gateway does not start after performing an update.
Low gateway performance with MJPG stream preview. *
Long gateway booting time. *
Profiles
Cannot set actions in profile.
Quick Apps
Invalid support of ‘secured’ property for door locks.
Recovery
Cannot upload beta version from local file when using Repair option.
In some cases page does not load properly. *
Scenes
Value set on slider is zeroed and locked when editing existing block scene.
Scenes based on sunrise and sunset do not function properly.
In some cases, scenes require editing to work after creating backup.
Syntax of fibaro.profile function is prompted incorrectly.
Cannot select device in single device block.
Inverted door lock condition states.
Bron: Home Center 3